The complete set for the building of a 4-meter greenhouse 3 sheets of cellular polycarbonate in the shape of rolls of 2.1 m in length and a diameter of 60-90 cm. The thickness of the material is 4 mm.
If you would like, you are able to boost the length of the construction to 6 metres or more. To try it, it is enough to attach a two-meter expansion. When selecting a drawing, look closely at the distance between the arches. This figure needs to be 65 cm, that’s the most appropriate length for the specified thickness of this substance. The diameter of the doors according to the producer’s drawing is 90 cm.
Before building a polycarbonate gidpostroy.ru greenhouse, then it is necessary to choose a location for its location. If that is done correctly, it is possible to provide yourself with a crop of fresh vegetables for the entire year.
The place for your upcoming greenhouse is marked instantly in the planning of this garden plot. In order to melt the snow at the place of their greenhouse as early as possible, the ideal point on the site is going to be a slight elevation. In addition, in this place won’t need to worry about significant humidity as soil and air inside the building.
Assemble a polycarbonate greenhouse on a raised site – means to care for the optimal temperatures indoors.
When it isn’t feasible to put a greenhouse in an elevated position, you will have to pour a layer of fine crushed stone about 20 cm and the identical layer of fertile land to make seedbeds.
Before building a greenhouse on your backyard plot, it’s also wise to consider where and how this construction is going to be installed. First, you have to select a place for this. The greenhouse should be found in a metropolitan region no less than a couple meters away from houses, barns and other structures.
How to Put in a greenhouse in Line with the sides of the Planet
Be sure to measure the dirt surface – it’s ideal to remove the top layer. This will also get rid of weed seeds. And for ease of work, eliminate the soil in an area that is around a meter wider on each side of the rectangle that you want.
Additionally, it is worth considering having a foundation. As manufacturers say, today most greenhouses don’t need it, particularly if they (greenhouses) are utilized just in the spring and summer time. But, seasoned anglers still suggest making at least an elementary basis from a bar. It’s very simple – it’s sufficient to connect with each other utilizing metal screws and corners four parts of timber with a cross-section of 10 * 10 cm. The size of such a foundation ought to be equal to the foundation of their upcoming greenhouse.
Simple bar base
You may even produce a strip foundation of concrete. He’s more reliable than a pub base, but demands greater financial and labour costs. By the way, the greenhouse, that will be used in the winter, without it and don’t do with it at all.
Stages of the creation of a strip base: a schematic representation
Many producers advise to install greenhouse structures without creating a base. For this intention, they equip the framework with specific T-shaped legs, so that the structure was securely fixed. But, as practice shows, it is still vital to construct a base: therefore and the basis will be more rigorously fixed and the elements of the basis in touch with the ground, will be stored much more in its original condition.
The major thing is to care for the material with special agents to protect the timber from moisture. The substance is normally installed on concrete blocks which are dug into the soil. To get a six-meter structure, they want 10 bits: four to either side and one at the center of the endings.
Before you do the greenhouse itself, you will need to select the perfect place for it. It has to be an even site, so the framework was found evenly, without distortions. It should be sunny and never obscured by trees or buildings.